Why I'd Rather Spend an Hour Explaining Packaging Specs Than Ten Weeks Fixing Them
I've rejected a lot of first-run packaging orders. In 2023, my team sent back roughly 18% of what vendors delivered—not because of bad presses, not because the designs were ugly, but because the specs were wrong and nobody caught it until the job was done.
And here's the part that bugs me: in almost every case, the customer was making a reasonable decision. They just didn't know what to ask for.
Which is why I've become a quiet evangelist for something most B2B suppliers actively avoid: telling customers exactly how the process works. Handing over the checklist. Explaining the tradeoffs before the contract, not after the reprint.
I know how that sounds. "Give away the expertise and what's left to charge for?" Fair question. I've heard it from sales teams for six years. My answer is the same every time: an informed customer isn't a harder customer. They're the only kind worth keeping.
The 24×36 Poster Question
Let's start with something simple. A customer messages in and asks, "How big is a 24 by 36 poster?"
Easy. 24 × 36 inches. 2:3 aspect ratio. 864 square inches. Done, right?
Sure—if you stop there. But I don't, because the next question is the one that matters: viewed from how far away?
That's where customers get tripped up. A 24×36 poster printed at 150 DPI is perfectly sharp from four to six feet. Blow the same file up to 48×72 and view it from the same distance, and you'll see pixels if the source file wasn't scaled correctly. At commercial offset—which is what most people mean when they say "professional"—the industry minimum is 300 DPI at final size. That's not a Pantone-style guideline. That's a print resolution standard, and it's been consistent for decades.
Here's the math anyone can run: pixels ÷ DPI = maximum print size in inches. A 3000 × 2000 pixel file at 300 DPI gives you 10 × 6.67 inches. That's a postcard. If you need a 24×36, you need a 7200 × 10800 pixel file. Most clients find this out after the proof comes back soft.
I could charge for that education. Or I could put it on a one-page PDF. I put it on the PDF.
The Coffee Label Problem
Labeling is where this gets expensive.
A client came to us last spring with packaging for a coffee product. Their back panel read "high caffeine content." Fine. Except we're in the US, and if you're making a caffeine claim, someone with a badge is eventually going to ask what number supports it.
So I asked the obvious question: "Cup of coffee has how much caffeine, exactly—what's the number sitting behind that claim on your panel?"
Silence.
They didn't know. Honestly, most people don't. A typical 8-oz cup lands around 95 mg, but that varies by bean, roast, grind, and brew method—you name it. Dark roast actually has slightly less caffeine by volume than light roast, which throws people off. If your label makes a claim and your actual extraction varies by lot, you're not selling coffee anymore. You're selling a recall.
To be fair, they weren't being reckless. They assumed "high caffeine" was marketing copy, not a regulated statement. It's an easy mistake. It's also a $40,000 mistake if the wrong inspector reads it the wrong way.
Can I fix that after the fact? Yes. Three weeks of back-and-forth, a reformatted label, and a new relationship with their compliance attorney. Or I can spend 15 minutes on a call and save everyone the grief. I'll take the call.
Where the Stakes Get Higher
Now scale that up to healthcare packaging, and you can see why I take this personally.
Since Amcor acquired Bemis in 2019, the Amcor Bemis workflow I audit against has gotten more formalized, not softer. Bemis healthcare packaging jobs—especially anything touching sharps containers—don't leave room for "within industry standard." They leave room for documented spec, verified batch, signed-off tolerance, and an audit trail a regulator can follow without calling me at 11 p.m.
That's the right standard. But it only works if the customer actually understands what they're signing.
Here's a small one: a client ordered a water filtration bottle component last year. Threads, gasket, the whole assembly—looked straightforward. The spec called out a thread pitch of 3.5 mm with a ± 0.15 mm tolerance. Their original drawing said "standard thread." There is no such thing. We printed to their spec, the cap didn't seal, and 8,000 units went back through QC. Cost of the rework: just north of $22,000, plus a launch delayed by three weeks.
Could the customer have avoided that? Yes—if someone had drawn them a one-page spec sheet explaining what "standard" actually meant. That's the entire argument.
And for the record, a Pantone color issue is milder but similar in kind. The industry standard for brand-critical colors is Delta E < 2. A Delta E of 2-4 is noticeable to trained observers. Above 4 is visible to most people. If you don't know that number, you can't specify it. And if you can't specify it, you can't reject the run when it's wrong.
"But What About the Margins?"
I hear this one a lot from sales teams. If the customer knows everything, why would they pay a premium?
Because price isn't the only thing education affects. It changes the type of customer you attract.
A customer who knows what 80 lb text means versus 80 lb cover—roughly 120 gsm versus 216 gsm—doesn't necessarily buy the cheapest option. They buy the right option. They stop asking for "premium" when they mean "heavier." They stop blaming you when their file is at 72 DPI and the proof comes back fuzzy. They stop treating every reprint like a negotiation.
Will some of them take the spec sheet to a cheaper vendor? Sure. A few. Maybe 10%. The rest stick around—because the vendor who explained the spec is the vendor who'll catch the next mistake before it costs them twenty-two grand.
I want to be clear that this whole approach is context-dependent. We're a mid-size B2B packaging operation, mostly healthcare and industrial, mostly repeat clients with predictable order patterns. That's a very specific situation. If you're doing one-off custom runs for seasonal retail campaigns, the education payback window narrows. Sometimes it disappears. I get that.
And I'll be honest: I don't always get it right. Q3 2023, rush job, an order that needed my sign-off before close of business. The 2019 deal—"Amcor acquires Bemis," as every headline put it—had changed our paperwork a lot more than it changed our people, and the new sign-off chain hadn't smoothed out yet. Normally I'd run the full spec review: substrate, ink swatch under controlled light, tolerance check on the first article. But the vendor needed approval in two hours or the run slipped a week. I used the ink swatch from the previous run. It matched. Barely. In hindsight, I should have pushed back on the timeline. But with the deadline sitting there, I made the call with the information I had. That's the job.
So Educate Them
The uncomfortable truth is that information asymmetry in packaging isn't a durable business model. It works once. Maybe twice. Then the customer finds out, and the relationship ends—usually with a review that mentions reprints and doesn't mention your name.
Clarity compounds. Spec sheets get shared. PDFs become internal standards. The customer who understood Delta E tells their procurement team, and the procurement team stops accepting "looks close enough." That's a better market. Slower to build, but it doesn't collapse when a competitor undercuts you by five cents a unit.
An informed customer isn't a threat to your margin. They're the reason your margin survives the first reprint.
Spend the ten minutes. Send the checklist. Answer the question about caffeine, and about 24×36, and about whether "standard thread" actually means anything.
The customers who appreciate it will stay. The ones who don't were never really your customers anyway.
Interested in Innovative Medical Packaging Solutions?
Learn how Greiner's R&D programs can support your product development and sustainability goals. Schedule a consultation with our innovation team.
Contact Us