ISO 13485 Certified | FDA Registered | Get 15% OFF on Your First Medical Device Order

The Packaging Emergency Kit: Loctite PL, Epoxy Gel, Super Glue, and the Stuff People Forget

If your packaging line is down and a truck is leaving in 36 hours, you don't need a bigger budget. You need Loctite PL, Loctite Epoxy Gel, Loctite Super Glue Liquid, and a box of blank package shipping label stock on a shelf. In the last seven years, I've helped coordinate more than 200 rush orders for smaller brands and mid-size manufacturers. Last quarter alone, we logged 47 rush jobs with 95% on-time delivery. The pattern is almost always the same: a broken fixture, a misprinted label, or a last-minute spec change. And the fix usually isn't a replacement part or a bigger team — it's the right adhesive, the right label, and a cool head.

So here's the short version: keep a 'rush box' stocked. Include Loctite PL for the rough bond, Loctite Epoxy Gel for the structural fix, Loctite Super Glue Liquid for the small crack, and blank package shipping labels for the last step. Also include a 32 oz reusable water bottle, because the person doing the repair is the most fragile piece of equipment on the floor. And if you're the one making the call under pressure, take two minutes to learn how do you read a manual blood pressure monitor. I'm serious.

Why this list comes from experience

My confidence in this list comes from a specific failure in March 2024. A long-time client called at 9 AM with an order due the next morning. Not a small order, but not impossible either. The carton sealer had a cracked mounting bracket. The replacement part was two days out, and normal turnaround for that repair would have been four. The smart move wasn't to wait for the part. It was to make the machine work with the right adhesive and then verify the bond before running.

We cleaned the bracket and the machine frame with isopropyl alcohol, scuffed the paint down to bare metal, and mixed a batch of Loctite Epoxy Gel. I think we waited six hours instead of just five minutes. Then we ran the machine at half speed for the first ten boxes. It held. We shipped the order at 11:30 that night. Not ideal, but workable.

Would I do it again? Yes, but I'd add one thing: a backup plan. That day, we also called every local supplier to find a spare bracket. We didn't need it, but knowing it existed took the edge off. My gut said trust the epoxy. The data — the lap shear numbers in Loctite's technical data sheet — supported that. But 'should work' is not a plan.

The four items that save rush orders

Loctite PL: the construction adhesive for ugly gaps

Loctite PL is not a super glue. It's a polyurethane construction adhesive in a caulk-style tube. I use it when surfaces don't fit tightly: a wooden guide block, a rubber bumper, a foam pad inside a fixture. It fills gaps and stays a little flexible, which matters on equipment that vibrates.

The trade-off is time. Polyurethane can take longer to cure than a cyanoacrylate or a two-part epoxy, especially in cold, dry air. In my area, January is the worst month. If I'm in a hurry, I use epoxy instead. Loctite PL is usually my second choice, not my first.

Loctite Epoxy Gel: the workhorse for metal and plastic

This is the first thing I reach for when a bracket breaks or a threaded insert spins. The gel formula is thick enough to stay where you put it. The two-part system gives you a predictable working time — about five minutes before it starts to set — and a strong, rigid bond once cured. The key is mixing ratio and surface prep. If the surface is oily or painted, the bond is a coin flip. I've made that mistake, and it cost me a redo.

One important limit: epoxy won't bond greasy surfaces. Clean with degreaser or alcohol first. For some smooth plastics, you need a primer or a light sanding. The bond from Loctite Epoxy Gel is strong, but only if the surface is actually prepared for it.

Loctite Super Glue Liquid: for small cracks and fast fixes

Loctite Super Glue Liquid is a low-viscosity instant adhesive. It flows into hairline cracks and tight joints, and it sets in seconds. I've used it to fix a cracked plastic sensor mount and reattach a split rubber feed wheel. It's also handy for holding a gasket in place while you reassemble a cover.

It's not a gap filler. If the crack is wide, the glue will fail. Use it with ventilation, and keep a bottle of acetone nearby for finger accidents. And don't use it on transparent polycarbonate for a structural repair — it can craze the plastic and make the damage worse.

Package shipping labels: the boring step that can kill you

Too many rush orders fail after the product is packed. In 2023, we had a shipment held at a processing center because the package shipping label was smudged and the machine couldn't read the barcode. The order was two days late. That was a process problem, not an adhesive problem. Now we keep a stack of thermal labels with permanent adhesive at every packing station. Each label gets printed, checked against the packing list, and applied to the clean top surface of the box.

According to USPS.com (accessed March 2025), package rates vary by weight, zone, and service. The label itself should be legible and placed where scanners can read it. Verify the address on the package shipping label before it goes out, especially if the box is reused. Cover an old label with a new one. I do not use super glue on a label — it can melt thermal paper and smear the address. Clear packing tape is fine for a peeling corner.

A 32 oz reusable water bottle for the human, not the machine

I know this looks out of place on an adhesive list. But I first added a 32 oz reusable water bottle to the emergency kit after a July afternoon with two rush orders, a temperature spike, and a technician who was clearly off their game by 3 PM. I made a simple math error on a spec sheet — read 12 mm as 12 cm — and we caught it just before printing. The heat didn't cause the mistake, but it made it easier.

Now the rule is simple: if you're on a rush repair, you drink one full bottle before starting and one more before you make the final call. It's not wellness theater. It keeps the person who's checking numbers from doing the math while dehydrated.

How do you read a manual blood pressure monitor?

If the idea of checking your own blood pressure at work feels excessive, consider this: I bought a manual blood pressure monitor after a 48-hour week where I saw a colleague make a preventable mistake that cost us $400 in wasted cartons. The root cause wasn't training. It was stress.

Here's how to do it. Sit down with your arm supported. Wrap the cuff around your bare upper arm, about one inch above the elbow. Place the stethoscope over the brachial artery — the pulse on the inside of your arm, just above the elbow. Inflate the cuff to about 180 mmHg, or 30 mmHg above your normal systolic if you know it. Then open the valve and let the gauge fall no faster than 2 to 3 mmHg per second. Note the first thumping sound as the systolic pressure. When the sound disappears, that last number is the diastolic pressure. That's the entire answer to 'how do you read a manual blood pressure monitor?'

Why does this matter in a packaging emergency? Because stress is a lagging indicator. I've seen a 20-point jump in my own blood pressure during a bad rush order. Taking a reading gives you a reason to say, 'I need a minute,' before you make a decision you'll regret.

When this list doesn't apply

I'd be lying if I said this triage list fixes every problem. It works in a narrow set of conditions, and being honest about that is part of the job.

Food contact and safety-critical repairs

Unless a Loctite product is explicitly rated for food contact, don't use it on a surface that touches food. Check the technical data sheet and the product label. When in doubt, quarantine the machine until the right product arrives.

Plastics that don't like adhesives

Polyethylene, polypropylene, and a few other low-surface-energy plastics are hard to bond. Loctite makes specialty products and primers for them, but those aren't the products I described above. If your part is one of those plastics, do a small test first. Don't assume epoxy will handle it.

Structural repairs with moving parts

I used Loctite Epoxy Gel on a mounting bracket, but that doesn't mean every structural repair can be glued. Parts that hold bearings, rotate under load, or carry heavy weight need a proper engineering review. An adhesive bond can be strong, but the strength values from a data sheet assume a clean, correctly prepared joint. Dirty or misaligned joints are a different story.

Process problems

Adhesives don't fix a process that's fundamentally broken. In 2022, our company lost a $12,000 contract because we tried to save $300 on expedited shipping. The delivery missed its window and the client's schedule collapsed. That loss led to a policy that now requires a 24-hour buffer on every quoted lead time. I wish I could say I designed that policy on purpose. It came from a mistake.

And if you're small, hear this: a small order is not a small deal to the customer who placed it. The vendors who ignored my first $200 orders are not the ones I call now. Small doesn't mean unimportant. It means potential.

$blog.author.name

Jane Smith

Sustainable Packaging Material Science Supply Chain

I’m Jane Smith, a senior content writer with over 15 years of experience in the packaging and printing industry. I specialize in writing about the latest trends, technologies, and best practices in packaging design, sustainability, and printing techniques. My goal is to help businesses understand complex printing processes and design solutions that enhance both product packaging and brand visibility.

Interested in Innovative Medical Packaging Solutions?

Learn how Greiner's R&D programs can support your product development and sustainability goals. Schedule a consultation with our innovation team.

Contact Us